Custom lifting belts webbing sling 3T endless polyester round sling TUV ISO CE GS Certification

Product Advantages:

• Industrial Sling life extended through rotation of bearing points.
• Load belt and slings are soft and pliable - conforms well to irregularly shaped loads.
• Industrial lifting straps and slings are tagged and color coded for easy identification.

Capacity:

The sling must be both long enough and strong enough for the load and the slinging method. Apply the mode factor for the slinging method. For use at temperatures exceeding 80°C or below 0°C refer to the suppliers instructions. If the slings are used in multi-leg arrangement the angle formed between the legs should not be less than 30° or greater than 90°. If abrasion, heat generated by friction or cutting from edges or corners are likely, select a sling fitted with protective sleeves and/or use suitable packing.

Inspect slings each day before use, looking for:

Missing or unreadable ID tag Melted, charred or weld-splattered areas
Acid or alkali burns Holes, tears, cuts, snags or embedded particles Broken or worn stitching Excessive abrasive wear or elongation Knots or brittle areas Broken, corroded, pitted distorted fittings .Do not use worn or damaged slings or attachments. Discard or repair them. Use damaged slings only after they are repaired, reconditioned, and proof tested by the sling manufacturer or a qualified person. Keep certificates of proof test.

Maintenance requirements are minimal. Belt slings may be cleaned with clear water. Remember weak chemical solutions will become increasingly stronger by evaporation. Regularly inspect belt slings and, in the event of the following defects, refer the sling to a Competent Person for thorough examination: illegible markings; damaged, chaffed or cut webbing; damaged or loose stitching; heat damage; burns; chemical damage; solar degradation; damaged or deformed end fittings.



1. Q:What is your advantages in all these manufacturers?

A:We treasure and try to understand all the different needs of our clients and seek to forge a long term professional relationship with them. The satisfaction of each and every customer is our main goal and motivation in conducting our business.

2. Q:What is lead time for the products?

A:According to the quantity and products you order, normally 7~35days, and we choose the best forwarder to supply service for both of us.

3. How to order?

A We are available via email, please free to send us your requests, and it will be nice of you to inform us detailed requests if you have. For example,size of goods,packing and qty of each item.

4. Q:What is your payments?

A:Payments: we can accept T/T, L/C.

5. Q:Do you supply free sample?

A:We can supply you the free sample if the value is small, but you pay the fee for freight.

6. Q:How can you guarantee the quality of the products we order?

A:We have test machine and can do the test for all of the products you order, and we supply you the quality certificate.

7. Q:Can we have a visit to your factory?

A:Welcome to our factory, and we supply pick-up service.

         SlingMan is a professional manufacturer and exporter of Polyester Woven Flat Webbing Sling, Endless Round Sling and Ratchet Straps in China for years . 

Our main Products. 

1, Polyester flat webbing sling  WLL from 0.5T to 50T   Safety Factor , from 5 to 1 --8 to 1, Available for Standard EN1492-1, AS/NZS1353.1 and ASMEB30.9

2, Polyester endless round sling   WLL from 0.5T to 200T  Safety Factor , from 5 to 1 --8 to 1, Available for Standard EN1492-2, AS/NZS44971 and ASMEB30.9

3, Polyester Ratchet Strap  LC from 400DN to 5000 DN, Safety Factor from 2 to 1 and 3 to Available for Standard EN12195-2, AS/NZS4380 and WSTDA-T-1

Our Secondary Products

1, Towing straps from Max breaking Strength 4T to 20T

2, Webbing Net, could be used for fall arrest protector, cargo net, lifting net

3, Slackline

4, Webbing for sling and lashing, we supplied them to some oversea producer.

Why choose us ?

1:Strict quality control, Our professional QC inspected every lots no matter it is sample or mass production strictly in WLL and SF. Every sales will be responsible for order details so it confirm each information from clients will be implemented correctly and strictly. At same time, we pay much attention to the raw material inspection so as to control it at initial activity.

2: Nice innovation.we found out the defect of products depending on the visit to clients after they get goods. Do it by questionnaire. We also try to talk with end user to know what they are not satisfied.Encourage the technician to improve products constantly.

3: Excellent customer service, our salesman is professional,experienced and full of passion. We reply our clients rapidly and professionally so they can feel our honesty and confidence. Clear and patient answer to client’s question make us win order quickly.

4: Good cost control, Competitive price must be first.we pursue and explore the management method so as to reduce the cost. Benefiting from the good relationship with our suppliers, due to nice payment terms to them, we can always get better price than our competitor from supplier. It makes us more competitive.